Linkage adjustable kit KTM / Husqvarna / GasGas 2025–2027 orange anodized
MX711PARTS Adjustable Link and Bell Crank Kit for KTM SMR / Husqvarna FS
Fine-tune your supermoto with the complete MX711PARTS suspension linkage kit, designed primarily for KTM SMR and Husqvarna FS. The adjustable link and specially designed bell crank combine rear ride-height adjustment with a more linear suspension response.
The revised linkage geometry delivers a more predictable rear-end response, helping you maintain traction and control during acceleration, over braking bumps and on uneven surfaces. The kit was developed and tested with racing riders.
Three interchangeable insert types, marked with one, two or three dots, can each be installed in two orientations, providing six adjustment positions.
Made from 7220 material, the kit includes the adjustable link, bell crank, bearings and three types of interchangeable inserts.
After installation, readjust the shock spring preload to suit the rider and the desired suspension setup. Shock revalving is not required to use the kit.
The following measurements apply to the complete link and bell crank kit and show changes in the distance between the swingarm and rear fender:
| Insert marking | Dots apart | Dots together |
|---|---|---|
| 1 dot | −1.5 cm | +1.7 cm |
| 2 dots | −2.7 cm | +1.3 cm |
| 3 dots | −0.4 cm – stock | +0.7 cm |
Main application: KTM SMR and Husqvarna FS, model year 2025.
Also compatible with the applicable KTM SX / SX-F and Husqvarna FC models from 2025, and GasGas MC / MC-F models from 2025–2027, in the 125–450 cc classes.
Not compatible with the 2027 KTM SX-F Factory Edition.
| Category: | Suspension linkage – KTM – 2025–2027 |
|---|---|
| Warranty: | 2 years |
| Weight: | 0.1 kg |
MX711PARTS Adjustable Link and Bell Crank Kit for KTM SMR / Husqvarna FS
Fine-tune your supermoto with the complete MX711PARTS suspension linkage kit, designed primarily for KTM SMR and Husqvarna FS. The adjustable link and specially designed bell crank combine rear ride-height adjustment with a more linear suspension response.
The revised linkage geometry delivers a more predictable rear-end response, helping you maintain traction and control during acceleration, over braking bumps and on uneven surfaces. The kit was developed and tested with racing riders.
Three interchangeable insert types, marked with one, two or three dots, can each be installed in two orientations, providing six adjustment positions.
Made from 7220 material, the kit includes the adjustable link, bell crank, bearings and three types of interchangeable inserts.
After installation, readjust the shock spring preload to suit the rider and the desired suspension setup. Shock revalving is not required to use the kit.
The following measurements apply to the complete link and bell crank kit and show changes in the distance between the swingarm and rear fender:
| Insert marking | Dots apart | Dots together |
|---|---|---|
| 1 dot | −1.5 cm | +1.7 cm |
| 2 dots | −2.7 cm | +1.3 cm |
| 3 dots | −0.4 cm – stock | +0.7 cm |
Main application: KTM SMR and Husqvarna FS, model year 2025.
Also compatible with the applicable KTM SX / SX-F and Husqvarna FC models from 2025, and GasGas MC / MC-F models from 2025–2027, in the 125–450 cc classes.
Not compatible with the 2027 KTM SX-F Factory Edition.
Discussion
Be the first who will post an article to this item!
MX711PEGS is a Czech brand of motorcycle footpegs and racing parts. The range includes motocross, enduro, supermoto and rally footpegs, alongside MX711PARTS CNC components.
